PDA

View Full Version : ARGH: Help, cannot get access to my exploited X-Box


landerson
03-24-2004, 07:29 PM
Hi guys! I bought all the gear and did a couple! Worked fine, but on one the screen ws jumpy so changed the bios! All was well! Then I was trying some games out and a couple were also jumpy, but tried them on the one that I had changed the bios and they worked!
So I thought, hey change the bios on the other! I did and now it won't boot! Just keeps cycling the x-box logo screen!!!

I tried going thorugh mech assault again, but because I have set the evox options to boot a game direct, as soon as it gets to the evox screen it tries to load the game and consequently I get the green service screen!!!

Hope this all makes sense? basically I can't gain access to the x-box so that I can fix it! What do I do?

Cheers
Lee

landerson
03-24-2004, 09:01 PM
OK I've tried an evox boot disk, slayes autoinstall, neither work and it is still clock looping after easily 1 hour!!!

Getting worried now, how do I fix this? Please guys!!!

Cheers
Lee

Neo
03-24-2004, 10:37 PM
Remove the IDE cable from the DVD ROM drive. Boot it up, you wil get an error. Then hot swap the hard drive into your computer and fix your damage.

Use HDD_DRIVER or fat-xplorer to access the HD.

Check xbox-scene for more details on hot swapping.

landerson
03-26-2004, 01:32 PM
Ok mate! Trying to do it now, it is detected etc but when I use HDD Driver it says no x-box HD detected :( I followed all the instructions for hot swap but still cannot get it to work! tried many times too!
Any ideas?

Cheers
Lee

MaDasHell
04-02-2004, 04:00 PM
if its still clock looping, just hook it up to your pc with xover cable & leave it for 20mins, should bring itself out of the loop