No Video Output after Chip install

[reyna12]

Appears to be no video signal coming from ps2 so can't see any picture.

Any possible causes and fixes?

[cyberdude]

go over your install again,
make sure all points are correct,
check all wires with muiltimeter, and also make sure you never spilt any solder on the mainboard.

[ps2mods101272]

Make sure none of the wires or chip are being squashed, this is normally the problem, if you cannot see any probs with your soldering, then its down to that.

[mp3boy]

If you still can't get it to work, uninstall the chip and get it working, then start again.

Cheers
Chris

[freakit]

I am having the same problem on a V7 with DMS4 chip. The install went fine. I played several back ups on it. My son took it to my parents house for the weekend and when he got there he said he had no video. I hooked it up here at my house and there is definately no video. I'll have to crack it open and see if any wires came loose.

[mp3boy]

That V7 sounds like a wire's come loose. Should be an easy fix.

Cheers
Chris