XBOX Flashing Help needed ASAP

[JK1]

Hello guys please help this is a serious problem

was flashing my xbox in the evox panel when someone unplugged the xbox!
now it wont boot into chip mode, and wont read copied discs either as there is no bios for it. boots into normal xbox mode fine. So what can i do how can i re flash it and get it back to normal?

Hellp!!!!!

[nimbles]

what chip have you got? if its a single bank type cheapmod then i'm afraid your in for some serious work.

if you want to keep the same chip then you'll need a friend with another modded xbox. you have to open it up, turn it on with the chip on, then with it still on remove his chip solder your chip in and reflash it (bios gets loaded to memory once the xbox is on so you can remove it)

if you have a multibank chip (like an xecuter chip) then just switch banks, boot up and then switch to the pooped bank and reflash the bios i'm guessing you don't have one of these- if you have one with an external programmer then you can correct it from the pc

the other option is getting a new chip- this almost exactly what happened to my first modchip- i did a bad flashand eventually just decdided to get a new multi bank chip (xecuter2.3 pro)

[JK1]

its a Matrix chip mate

[nimbles]

yup (http://xbox-scene.com/modchips3b_cheapmod.php) only one bank, so hotswap or new chip are your only options then unfortunately- hmmm....it says it can be externally via LPT- do you have an external flashing kit- if its solderless then should be reaosnably simple to hot swap and reflash

[JK1]

fecking hell : cheers bud