how do i flash the lpc mod ?

[cyberdude]

how do i flash the lpc? is this chip write protected or somethink?
as i tryed through slayers to flash it but it just hangs on erasing screen?



also i read i got to Make sure that the following line is inserted in the .ini file under [BIOS] section:
"Flash = 0xbf61,"SST - 49LF020",0x40000" for Matrix/Xodus
do i put this line in evox.ini in c: drive ?

[thecheekymonkey]

mail me your evox ini file mate, i`ll fully update it for you

then try again, make sure the bios is 256k in size though!!!!!!!!!!!!!!


consoleworkshop@hotmail.com

[nimbles]

you can flash it with evox or better still get a "x2flash for sst49lf020", don't think an lpc is usually write protected.

make sure you use the correct bios size though lpc chips only have 1x256k bios so make sure the bios you use is 256k

[cyberdude]

thecheekymonkey (http://www.dvdrom-guide.com/forums/member.php?u=701)
do i send you the evox ini file in c: drive?
also i downloaded Xecuter2.4981.rar i opened it up and it has these files:

4981.06_256k.bin
4981.67_256k.bin
make1mb.bat
x2_IGR_disabled

is this the correct bios ?

also slayers says the bios version is evox 2.2, is this a old bios? it was already on the chip when i bought it, just curious,
thanx guys

[thecheekymonkey]

4981.06_256k.bin use that one only, forget the rest for now, check the size of the above bios, (right click>properties) got to be 256k (windows may give 2 results, slightly different), but around the 256k mark, and yes mail me you evox ini, from your c:\ directory...................................

[cyberdude]

ok mate thanx
email sent

[thecheekymonkey]

havent received mate, try again

consoleworkshop@hotmail.com

[cyberdude]

ok mate,
sent another email through hotmail.

[thecheekymonkey]

eh, just got one from jjcool, and now one from picardo, replyed yo jjcool, if its a different person, picardo let me know, and i`ll send to you as well
lol

[thecheekymonkey]

ahh sorted, replyed to jjcool

[thecheekymonkey]

did you receive my mail, ive just got 3 in a row from you, all with the same message?

[cyberdude]

yes mate got the email thanx,

i done what you said, put evox. ini file in bios directory, also put evox.ini in c: root but it just hangs at the erasing screen?
any ideas mate?

[cyberdude]

ok i just looked at the chip and its a alladin v1.1, i thought it was a lpc modechip but it says alladin v1.1 on it. if that helps,

cant seem to find a diagram or anythink on this chip, to see how i write enable the chip?

[freakit]

when power it on try holding down the power button. Thats how I flash my aladdin advanced chips. On the aladdin advance chips the led on the eject button will change to red indicating the flash protect is off.

[cyberdude]

thanx mate, i tryed what ypou said try holding down the power button, but it dident work.