cyberdude
04-15-2004, 12:16 PM
hi,
i built a new pc but it freezes after a few minuites?
i get a continuous buzzing sound as it freezes?
the mainboard is a dfi lanparty reversion a nforse mobo,
memory is infinion 512 400 mhz ddr
cpu (http://forums.guru3d.com/showthread.php?s=&threadid=84958#) is a unlocked 2500+ amd (http://forums.guru3d.com/showthread.php?s=&threadid=84958#)
cpu cooler is a zelleman cooper flower cooler,
i have setup the bios right
the cpu temperature is reaching around 28 - 31 degrees in bios,
i tryed it in safe mode, left it on for about 45 mins and guess what no crashing? the pc ran fine ?
freezes in normal mode, works ok on safe mode no freezing ?
so im guessing its a driver problem,
i dont know whever i should install windows 2000 (http://forums.guru3d.com/showthread.php?s=&threadid=84958&perpage=10&pagenumber=3#) or windows server (http://forums.guru3d.com/showthread.php?s=&threadid=84958&perpage=10&pagenumber=3#), as ive reformatted and installing xp, but as soon as i install drivers etc then i start to have problems, and its hard to track down what driver it is thats causes the problem as there loads of drivers for windows?
anyone have any ideas?
thanx
i built a new pc but it freezes after a few minuites?
i get a continuous buzzing sound as it freezes?
the mainboard is a dfi lanparty reversion a nforse mobo,
memory is infinion 512 400 mhz ddr
cpu (http://forums.guru3d.com/showthread.php?s=&threadid=84958#) is a unlocked 2500+ amd (http://forums.guru3d.com/showthread.php?s=&threadid=84958#)
cpu cooler is a zelleman cooper flower cooler,
i have setup the bios right
the cpu temperature is reaching around 28 - 31 degrees in bios,
i tryed it in safe mode, left it on for about 45 mins and guess what no crashing? the pc ran fine ?
freezes in normal mode, works ok on safe mode no freezing ?
so im guessing its a driver problem,
i dont know whever i should install windows 2000 (http://forums.guru3d.com/showthread.php?s=&threadid=84958&perpage=10&pagenumber=3#) or windows server (http://forums.guru3d.com/showthread.php?s=&threadid=84958&perpage=10&pagenumber=3#), as ive reformatted and installing xp, but as soon as i install drivers etc then i start to have problems, and its hard to track down what driver it is thats causes the problem as there loads of drivers for windows?
anyone have any ideas?
thanx